The whole world of Panel Processing machines
Curvilinear Edge Bander J-2500.in (Semi Auto)
Salient Features :
- This is an extremely flexible machine for application of PVC/ABS or Veneer on straight or shaped panels. The Edge Banding is a semi-automatic machine for curvilinear work piece, wherein the predefined length of PVC/ABS to be glued to the laminate can be set for repetitive work piece and the digital temp.
- Pneumatic cutting device for pre-defined length, with foot switch.
- Glue roller apply glue on board & tape for perfect bonding
- Gearbox for smooth & power drive with long life synthetics lubrication.
- Easy regulation of variable speed 4 to 12 m/min
- Revolving edge coil holder plate 525 mm. Ø
- Rubber & hard chrome steel rollers to support & guide the work piece
- Working table with specially designed hylum surface for heat insulation & frictionless movement of work piece
- Tilting working table from 0° & 45°
- Electronic digital temp. controller with safety circuit, which allows to start the drive motor only when the hot glue has reached the set temperature
The glue in the glue pot, glue leveler, wiper, the extrusion screw and the heating element all make a bonding system, which gives an effective & efficient banding to the work piece.
A user friendly electro control panel which monitors & controls the operation
The pneumatic cutting device can be set to actuate the pneumatic cutter to cut the band
A specially designed hylum surface working table can be tilted from 0° & 45°
| Model No | Unit | J-2500.in |
|---|---|---|
| Table size (L x B) | mm | 1100 × 800 |
| Minimum work piece length | mm | 280 |
| Work piece thickness range | mm | 10 – 50 |
| Edge Banding Thickness for PVC / ABS in coil form | mm | 0.4 – 2.0 |
| Min. Radius for curved Edging | mm | 20 |
| Glue pot capacity | kg | 1.5 |
| Feed speed | m/min | 4 to 12 |
| Front table adjustment (Up & Down) | mm | 3 |
| Front table tilt angle | degree | 0° to 45° |
| Front table extension length | mm | Up to 200 |
| Maximum setting temperature | °C | 180°C |
| Compressed air requirement | kg/cm² | 0.5 / 5–7 |
| Heating element | kw | 1.5 |
| Electric motor | kw | 0.37 (415V, 3φ) |
| Power supply | voltage / φ | 415V / 3φ |
| Total Power | hp | 2.5 |
| Machine dimension (L × B × H) | mm | 1750 × 950 × 950 |
| Approx. net weight | kg | 240 |