The whole world of Panel Processing machines
Curvilinear Edge Bander J-3045.in (Semi Auto)
Salient Features :
- This is an extremely flexible machine for application of PVC/ABS or Veneer on straight or shaped or 45° panels. The Edge Banding is a semi-automatic machine for curvilinear work piece, wherein the predefined length of PVC/ABS to be glued to the laminate can be set for repetitive work piece and the digital temp.
- 45° Edge Banding panels are widely used for mfg. handleless drawer, door frame, worktable etc.
- Pneumatic cutting device for pre-defined length, with foot switch.
The glue in the glue pot, glue leveler, wiper, the extrusion screw and the heating element all make a bonding system, which gives an effective & efficient banding to the work piece.
The pneumatic cutting device can be set to actuate the pneumatic cutter to cut the band for a pre-defined length using an electronic counter.
Inclined 45° Edge Banding
| Model No | Unit | J-3045.in |
|---|---|---|
| Table size (L × B) | mm | 1150 × 900 |
| Minimum work piece length | mm | 280 |
| Work piece thickness range | mm | 10 – 50 |
| Inclined 45° Edge | mm | 10 – 25 |
| Full Straight Edge | mm | 10 – 50 |
| Edge Banding Thickness for PVC & ABS in coil form | mm | 0.4 – 2.0 |
| Min. Radius for curved Edging | mm | 20 |
| Glue pot capacity | kg | 3 |
| Feed speed | m/min | 4 to 12 |
| Front table adjustment (Up & Down) | mm | 3 |
| Front table tilt angle | degree | 0° to 45° |
| Maximum setting temperature | °C | 180° |
| Compressed air requirement | hp/kg/cm² | 0.5 / 5–7 |
| Heating element | kw | 1.5 |
| 45° Top groove motor | kw | 0.37 (415V, 3φ) |
| Electric motor | kw | 0.37 (415V, 3φ) |
| Power supply | voltage / φ | 415V / 3φ |
| Total Power | hp | 3 |
| Machine dimension (L × B × H) | mm | 2150 × 1100 × 1080 |
| Approx. net weight | kg | 330 |