The whole world of Panel Processing machines
Model : J-3200.in Pro
Salient Features :
- Sturdily built heavy duty machine to suit Indian working condition for precise cut with burr free cutting
- Lifting and tilting of saw unit by means of hand wheels on the machine. Both on front side for more convenience
- Electronic Digital readout of saw unit tilt
- Rip fence with fine setting for precise positioning
- Made in India with best service support & very economical spares
Precision Sliding table made from large section extruded aluminium profile with a closed structure to offer the maximum tensile strength. The system for carriage is on hardened ground, prism guides, which allows precise, straight cutting.
Scoring saw precision lever mechanism
Anodised alluminum ripfence with sliding system on heavy round bar for parallel cutting up to 1250 mm. Fine setting mechanism allows for precise measurements for parallel cuts.
Easy & fast changing of main saw & scoring saw blades. Also entire saw unit on heavy duty cast iron trunnion
Smooth-running and powerful saw unit. Runs incredibly smooth, because it is electronically balanced as a fully assembled unit, made of cast components.
The sturdy frame provides a rigid support for all cutting with telescopic cross-cut fence with alluminum guides for precise and easy positioned. Also panels to be squared and cuts at an angle up to 45° on both sides of the table.
Digital Read Out (DRO-F)
Optional : DRO that displays the job length digitally. This enables a setting precision accuracy of +/- 0.1 mm.
Digital Read Out (DRO-R)
Optional : DRO that displays the job length digitally. This enables a setting precision accuracy of +/- 0.1 mm.
| Model No | Unit | J-3200.in Pro |
|---|---|---|
| Sliding Table | ||
| Sliding table length | mm | 3200 |
| Sliding table width | mm | 360 |
| Main Saw Unit | ||
| Max diameter saw blade | mm | 355 × 30 |
| Saw blade speed | rpm | 4000 / 5000 |
| Tilting of saw blade | degree | 90°–45° (manual) with electronic digital read out |
| Max cutting depth at 90° | mm | 102 |
| Max cutting depth at 45° | mm | 72 |
| Up-down movement of saw blade | Manual | |
| Motor for saw blade | hp | 5 |
| Scoring Saw Unit | ||
| Max diameter scoring blade | mm | 120 × 20 |
| Scoring blade speed | rpm | 8500 |
| Tilting of scoring blade | degree | 90°–45° (manual) with electronic digital read out |
| Up-down movement of scoring blade | Manual | |
| Lateral adjustment scoring blade | mm | ±3 |
| Max depth of cut of scoring blade | mm | 5 |
| Motor for scoring blade | hp | 1 |
| Other Specifications | ||
| Cutting Width / Rip Capacity | mm | 1250 |
| Dimension Main Saw Table | mm | 560 × 900 |
| Length Cross-Cut Fence | mm | 2000 (telescopes to 3200 mm) |
| Dust extraction port diameter | mm | 100 & 50 |
| Total Power | hp | 8 |
| Machine Dimension (L × B × H) | mm | 3400 × 3710 × 1300 |
| Approx. Net Weight | kg | 850 |
Pneumatic Clamp for Panel Saw (Optional-can be ordered any time)
Model:- PC
A very useful accessory. This pneumatic clamp allows more maneuverability in panel handling, sizing and cutting. Also quality cuts on irregular Panels or thin work pieces.
Model:- PC + (2.0)
PC + (2.0) : 3 step Pneumatic Clamp: This 3 step clamp allows more flexibility for handling small pieces.